Econoline E550 V10-6.8L VIN S (2003)
Stabilizer Bar: Service and Repair
Rear
Stabilizer Bar and Link - E550
Removal and Installation
1. Raise and support the vehicle.
2. Remove the nuts from both lower ends of the stabilizer bar links and remove the washers.
-
Discard the nuts.
3. Remove the nuts and washers from both upper ends of the stabilizer bar links and remove the links.
-
Discard the nuts.
4. Remove the bolts from both stabilizer bar retainer-to-axle brackets and remove the stabilizer bar.
-
Discard the bolts.
-
Remove the stabilizer bar bushings if necessary.
5. To install, reverse the removal procedure.
