ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Extension Housing Seal and Bushing|Page 4162 > < Extension Housing Seal and Bushing|Page 4160
Page 4
background image

4. CAUTION:  Be sure not to raise the back of the transmission too high. If it makes contact with the underbody, damaged to the TSS sensor should

occur.

Install the transmission insulator and retainer and the bolts.

5. Lower the transmission on to the rear crossmember support.

6. Install the transmission insulator and retainer-to-crossmember retaining nuts.

7. Remove the high lift transmission jack with the special tool from the transmission.

Extension Housing Seal and Bushing|Page 4162 > < Extension Housing Seal and Bushing|Page 4160