Econoline E550 V10-6.8L VIN S (2003)
![background image](/ford/econoline_e550/v10-6.8l_vin_s/Page-1469005.png)
6. CAUTION: Discard outer manual control lever shaft nut. Do not reuse. The old nut will not retain torque specification.
Remove the manual control lever.
1
Remove the outer manual control lever shaft nut.
2
Remove the manual control lever.
7. Remove the digital transmission range TR sensor.
1
Remove the two bolts.
2
Remove the digital TR sensor.
8. Remove the manual control valve detent lever spring.
1
Remove the bolt.
2
Remove the manual control valve detent lever spring.
9. NOTE: Use a shop cloth to protect the transmission case surface.