Econoline E550 V10-6.8L VIN S (2003)
6. Install the solenoid screen assembly by pushing it in and rotating it to lock.
7. NOTE: Prior to installing the solenoid body assembly, coat the case connector bore with silicone grease.
Install the solenoid body assembly.
1
Install the solenoid body assembly.
2
Install the nut.
3
Install the bolts and nut finger-tight.
8. Install the main control valve body, aligning the manual shift valve with the inner manual valve detent lever. Install the nuts and bolts finger-tight.
9. If previously installed, remove, then reinstall, the bolt into the separator plate reinforcing plate.
1
Remove the bolt.
