Econoline E550 V10-6.8L VIN S (2003)
![background image](/ford/econoline_e550/v10-6.8l_vin_s/Page-1550004.png)
Part 2 Of 2
Special Tool(s)
Removal
1. Raise the vehicle on a hoist or raise the rear end of the vehicle with a jack. Install safety stands under the frame rails and lower the jack or hoist
enough to allow the rear axle to drop into the rebound position for working clearance.
2. Index-mark the driveshaft flange and the pinion flange to maintain driveline balance during assembly.
3. Remove the four bolts.