Econoline E550 V10-6.8L VIN S (2003)
2. NOTE: If the wheel bearing oil seal is leaking, the axle housing vent may be plugged.
Using the special tools, remove the rear wheel bearing and wheel bearing oil seal.
Installation
1. Lubricate the new rear wheel bearing.
^
Use SAE 75W-140 High Performance Rear Axle Lubricant F1TZ-19580-B or equivalent meeting Ford specification WSL-M2C192-A.
2. Using the special tools, install the rear wheel bearing.
3. Lubricate the lip of the new wheel bearing oil seal.
^
Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.
4. Using the special tools, install the wheel bearing oil seal.
5. Install the axle shafts.
Drive Pinion Seal
Drive Pinion Seal
