Econoline E550 V8-7.3L DSL Turbo VIN F (2002)
1. Lubricate the piston boot, caliper piston, piston seal and caliper bores with clean High Performance DOT 3 Brake Fluid C6AZ-19542-AB or
equivalent DOT 3 fluid meeting Ford specification ESA-M6C25-A.
2. Install the caliper pistons.
1
Install the piston seal.
2
Install the piston boot on the piston.
3
CAUTION: Be careful not to damage or dislodge the piston seal. Insert the caliper piston.
4
CAUTION: Be careful not to cock the caliper piston. Position the boot in the bore, and press the caliper piston into the bore.
5
Install the piston boot retainer.
3. Install the disc brake caliper.