Econoline E550 V8-7.3L DSL Turbo VIN F (2002)
2. Using the special tool, install the extension housing bushing.
3. NOTE: The extension housing seal is model dependent. Refer to the correct usage.
Align the extension housing seal in the extension housing, with the drain hole positioned downward.
4. Using the special tool, install the extension housing seal.
5. Install the driveshaft,
6. Remove the supports and lower the vehicle.
7. Fill the transmission to the specified level with clean automatic transmission fluid.
Tension Housing Gasket
Tension Housing Gasket
Special Tools
Special Tool(s)
Removal
1. WARNING: On vehicles equipped with an auxiliary battery, both the negative and positive battery cables must be disconnected.