Econoline E550 V8-7.3L DSL Turbo VIN F (2002)
4. NOTE: Hold the rear axle disc and plate kit to keep it from falling out of the differential case.
Install the rear axle disc and plate kit and differential side gear in the differential case.
-
The rear axle disc and plate kit must stay assembled to the differential side gear splines. The retainer clips must seat completely in the
differential case pocket.
5. Install the bottom differential clutch pack and differential side gear in the differential case.
-
The rear axle disc and plate kit must stay assembled to the differential side gear splines. The retainer clips must seat completely in the
differential case pocket.
6. Install the special tool.
-
Apply a small amount of grease to the special tool's centering hole.
7. Screw the special tool into the Step Plate.
8. Position the differential case onto the holding fixture.