Econoline E550 V8-7.3L DSL Turbo VIN F (2002)
15. Position the differential assembly, including the differential bearing cups and differential bearing shims in the differential housing. Tighten bearing
caps to specification.
16. Position the special tool.
1
Rotate the differential case to verify that the differential bearings have seated correctly.
2
Position the special tool.
17. Measure the differential case runout.
-
If the runout does not exceed the specification, use the new differential bearings for assembly.
-
If the runout exceeds the specification, install a new differential case.
Installation
All axles
1. CAUTION: If installing a new anti-lock speed sensor wing, align the notch on the case flange and the tab on the anti-lock speed sensor ring.