Econoline E550 V8-7.3L DSL Turbo VIN F (2002)
Seals and Gaskets: Service and Repair
Rear Drive Axle/Differential - Ford 8.8-Inch Ring Gear
Drive Pinion Seal
Special Tools
Special Tool(s)
Removal
1. Remove the pinion flange.
2. Using a screwdriver, force the metal flange of the rear axle drive pinion seal up and strike it with a hammer.
3. Install gripping pliers, and remove the seal.
Installation
1. Lubricate the new rear axle drive pinion seal.
-
Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.
2. CAUTION: If the rear axle drive pinion seal becomes misaligned during installation, remove the rear axle drive pinion seal and install a new
seal.
