Econoline E550 V8-7.3L DSL Turbo VIN F (2002)
![background image](/ford/econoline_e550/v8-7.3l_dsl_turbo_vin_f/Page-1571005.png)
9. Using the special tool, crimp the large driveshaft slip-yoke boot clamp.
10. Install the driveshaft.
11. NOTE: If a vibration exists, insert 1.59-mm (1/16-inch) shims, as necessary, between the driveshaft center bearing bracket and support plate (on
the bolt ends of the driveshaft center bearing bracket) to reduce compression of the rubber insulator.
Road test the vehicle.