Edge AWD V6-3.5L (2009)
17. If equipped, remove the keypad.
18. Remove the 10 door module bolts and remove the front door module, transfer parts as necessary.
-
To install, tighten to 9 Nm (80 lb-in).
19. To install, reverse the removal procedure.
-
The front window motor must be de-initialized, then initialized whenever the LH or RH (MKX) or LH (Edge) front window motor is removed
from the window regulator drum housing, a new window regulator is installed, a new window glass is installed, a new top run is installed or for
any operation in which grease or lubricants are applied to the window regulator or glass run.