Edge AWD V6-3.5L (2009)
Rear Door Panel: Service and Repair
Door Trim Panel - Rear
NOTE: MKX shown, Edge similar.
NOTE: RH door shown, LH door similar.
Removal and Installation
All vehicles
1. Remove the rear door handle bezel.
-
Remove the screw cover.
-
Remove the screw.
-
Remove the rear door handle bezel.
-
Disconnect the electrical connector, if equipped.
MKX only
2. Remove the screw cover.
All vehicles
3. Remove the screw.
4. Remove the 6 trim panel screws.
5. Disengage the bottom of the door trim panel from the door.
-
Pull outward to disengage the push nuts from the retainers.
6. Lift the top of the door trim panel edge upward and out of the beltline moulding.