Edge AWD V6-3.5L (2009)
![background image](/ford/edge_awd/v6-3.5l/Page-2143001.png)
Hood Latch: Service and Repair
Hood Latch
Hood Latch
Removal and Installation
1. NOTE: Mark the hood latch position prior to removal of the hood latch bolts.
Remove the 2 hood latch bolts and position the hood latch aside.
-
To install, tighten to 11 Nm (97 lb-in).
2. Disconnect the hood latch release cable and remove the hood latch.
3. NOTE: When the hood latch is installed, the latch adjustment must be checked to make sure the latch is installed and aligned correctly.
To install, reverse the removal procedure.