Edge AWD V6-3.5L (2009)
Scuff Plate: Service and Repair
Scuff Plate Trim Panel - Rear
Scuff Plate Trim Panel - Rear
Removal
1. NOTICE: To avoid damage to the scuff plate trim panel, remove any retaining clips from the body and attach them to the scuff plate trim
panel before installation.
Remove the rear door scuff plate trim panel by lifting on the rear inside lip of the scuff plate trim panel and lift the scuff plate trim panel enough to
release the rear retaining clip from the body. Lift the front inside lip of the scuff plate trim panel and lift the scuff plate trim panel to release the
front retaining clip. Remove the scuff plate trim panel.
2. If any of the scuff plate trim panel retaining clips stay attached to the body, release the retaining clip from the body. Attach the retaining clip to the
scuff plate trim panel before installation.
3. To install, reverse the removal procedure.