Edge AWD V6-3.5L (2009)
![background image](/ford/edge_awd/v6-3.5l/Page-2194001.png)
Trim Panel: Service and Repair
C-Pillar Trim Panel
C-Pillar Trim Panel
Removal and Installation
1. NOTE: Inspect the safety belt D-ring cover for damage. If the safety belt D-ring cover does not remain in place, install a new cover.
Remove the safety belt D-ring cover and remove the safety belt bolt.
-
To install, tighten to 54 Nm (40 lb-ft).
2. Remove the screw cover.
3. Remove the screw.
-
To install, tighten to 9 Nm (80 lb-in).
4. Position the quarter trim panel aside to allow C-pillar trim panel removal.
5. Remove the C-pillar trim panel.
-
Pull outward and downward to remove the panel.
6. To install, reverse the removal procedure.