Edge AWD V6-3.5L (2009)
5. NOTE: LH shown, RH similar.
Install the air deflector-to-track screw and air deflector arm capture plate on the affected track.
-
NOTE: If the nut plate(s) becomes stripped during installation, a new nut plate can be installed. For additional information, refer to Roof
Opening Panel - Exploded View See: Sunroof / Moonroof Panel/Service and Repair/Roof Opening Panel - Exploded View.
Tighten to 2 Nm (18 lb-in).
6. Attach the bottom of the concertina blind to the guide track in the most forward position.
7. NOTE: Do not install the headliner at this time.
Install the front shade assembly but do not carry out the roof opening panel motor initialization. For additional information, refer to Roof Opening
Panel Shade Assembly See: Sun Shade/Service and Repair/Roof Opening Panel Shade Assembly.
8. Re-time the roof opening panel. For additional information, refer to Timing Adjustment See: Adjustments.