Edge AWD V6-3.5L (2009)
Sunroof / Moonroof Windguard: Service and Repair
Air Deflector
Air Deflector
Removal and Installation
NOTE: There may be a special service replacement fastener available if a screw hole becomes stripped during installation. For additional information,
refer to Roof Opening Panel - Exploded View See: Sunroof / Moonroof Panel/Service and Repair/Roof Opening Panel - Exploded View.
1. Position the roof opening panel glass to the full OPEN position.
2. Remove the 2 air deflector-to-track screws and air deflector arm capture plate.
-
NOTE: If the nut plate(s) becomes stripped during installation, a new nut plate can be installed. For additional information, refer to Roof
Opening Panel - Exploded View See: Sunroof / Moonroof Panel/Service and Repair/Roof Opening Panel - Exploded View.
To install, tighten to 2 Nm (18 lb-in).
3. Remove the 6 air deflector catcher bracket screws.
-
To install, tighten to 2 Nm (18 lb-in).
4. Remove the air deflector assembly.
5. To install, reverse the removal procedure.