Edge AWD V6-3.5L (2009)
Driver seat
12. If equipped, connect the DSM electrical connectors and attach any retainers holding the wire harness to the seat track.
13. Connect the seat track position sensor and attach any retainers holding the wire harness or electrical connectors to the seat track.
All seats
14. For power seat, connect all the seat track motor electrical connectors and attach any retainers holding the wire harness or electrical connectors to
the seat track.
15. Connect the safety belt buckle switch electrical connector. Attach any retainers holding the wire harness or electrical connector to the seat track.
16. Attach the seat wire harness main feed in electrical connector(s) to the seat track brackets.
17. Install the front seat backrest. For additional information, refer to Seat Backrest - Front See: Seat Back/Service and Repair/Removal and
Replacement/Seat Backrest - Front.
Driver seat with memory
18. Set the memory seat soft stops.