Edge AWD V6-3.5L (2009)
16. Remove the RH primary timing chain guide lower bolt.
17. NOTE: The RH primary timing chain guide must be repositioned to allow the coolant pump to be removed.
Loosen the RH primary timing chain guide upper bolt.
-
Rotate the guide and tighten the bolt.
18. Place clean lint-free shop towels in the oil pan opening to prevent coolant from entering the oil pan during coolant pump removal.
19. Remove the 8 bolts and the coolant pump.
Installation
1. NOTE: Clean and inspect all sealing surfaces.
Install the coolant pump and the 8 bolts.
-
Tighten in the sequence shown to 10 Nm (89 lb-in).
