Edge AWD V6-3.5L (2009)
10. Remove the battery tray.
11. Disconnect the battery harness electrical connector.
12. Remove the nut and disconnect the power feed from the battery terminal.
13. Remove the bolt and the ground wire.
-
Detach the 2 wiring harness retainers from the cowl.
14. Disconnect the vacuum hose from the upper intake manifold.
15. Disconnect the Evaporative Emission (EVAP) tube quick connect coupling from the purge valve.
16. Disconnect the upper radiator hose, lower radiator hose and 2 heater hoses from the thermostat housing.
