Edge AWD V6-3.5L (2009)
79. NOTE: VCT solenoid seal removal shown, spark plug tube seal removal similar.
Inspect the VCT solenoid seals and the spark plug tube seals. Install new seals if damaged.
-
Using the VCT Spark Plug Tube Seal Remover and Handle, remove the seal(s).
80. Remove the 3 bolts and the power steering pump.
81. Remove the 3 bolts and the accessory drive belt tensioner.
82. Using the Strap Wrench, remove the crankshaft bolt and washer.
-
Discard the bolt.
83. Using the 3-Jaw Puller, remove the crankshaft pulley.