Edge AWD V6-3.5L (2009)
NOTE: Piston rings should not be transferred from one piston to another.
NOTE: Refer to the Engine system level for the specification.
NOTE: The cylinder bore must be within specification for taper and out-of-round.
1. Use a piston without rings to push a piston ring in a cylinder to the bottom of ring travel.
2. Use the Feeler Gauge Set to measure the top piston ring end gap and the second piston ring end gap.
Piston Ring-to-Groove Clearance
Piston Ring-to-Groove Clearance
NOTE: Refer to the Engine system level for the specification.
1. Inspect the piston for ring land damage or accelerated wear.
2. Using the Feeler Gauge Set, measure the piston ring-to-groove clearance.
Piston Pin Diameter