Edge AWD V6-3.5L (2009)
Valve Cover - RH (View 2 of 2)
Removal
NOTICE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while
cleaning gasket surfaces that enters the oil passages, coolant passages or the oil pan, can cause engine failure.
1. Remove the RH ignition coils.
2. Disconnect the Power Steering Pressure (PSP) switch electrical connector.
3. Disconnect the RH Catalyst Monitor Sensor (CMS) electrical connector and pin-type retainer.
4. Disconnect the RH Heated Oxygen Sensor (HO2S) electrical connector.
5. Disconnect the RH Variable Camshaft Timing (VCT) solenoid electrical connector.
6. Disconnect the 3 RH fuel injector electrical connectors.
