Edge AWD V6-3.5L (2009)
14. Disconnect the 3 RH coil-on-plug electrical connectors.
15. Detach all of the wiring harness retainers from the RH valve cover and stud bolts.
16. Disconnect the LH CMS electrical connector.
17. Disconnect the LH VCT solenoid electrical connector.
18. Disconnect the 3 LH coil-on-plug electrical connectors.
19. Detach all of the wiring harness retainers from the LH valve cover and stud bolts.
20.
NOTE: The A/C compressor must remain bolted to the engine block prior to installing the oil pan.
Remove the A/C compressor nut and stud.
