Edge AWD V6-3.5L (2009)
Inspect the VCT solenoid seals and the spark plug tube seals. Remove any damaged seals.
-
Using the VCT Spark Plug Tube Seal Remover and Handle, remove the seal(s).
31. Using the Strap Wrench, remove the crankshaft bolt and washer.
-
Discard the bolt.
32. Using the 3 Jaw Puller, remove the crankshaft pulley.
33. Using the Oil Seal Remover, remove and discard the crankshaft front seal.
34. Remove the 2 bolts and the engine mount bracket.
35.
NOTE: Only use hand tools to remove the studs.