Edge AWD V6-3.5L (2009)
28. Install the accessory drive belt tensioner and the 3 bolts.
-
Tighten to 11 Nm (97 lb-in).
29. Install the power steering pump and the 3 bolts.
-
Tighten to 24 Nm (18 lb-ft).
30. Attach all of the wiring harness retainers to the LH valve cover and stud bolts.
31. Connect the 3 LH coil-on-plug electrical connectors.
32. Connect the LH camshaft VCT solenoid electrical connector.
33. Connect the LH Catalyst Monitor Sensor (CMS) electrical connector.
34. Attach all of the wiring harness retainers to the RH valve cover and stud bolts.