Installing Timing Cover on Ford Edge AWD V6-35L (2009) Engine
29. NOTE: The area between the front of the engine and the body of the vehicle must be unobstructed in order to properly remove and install the
engine front cover.
Remove the 2 power steering reservoir nuts.
-
Support the power steering reservoir and hose away from the front of the engine with a length of mechanic's wire.
30. Remove the 3 power steering pump bolts.
-
Support the power steering pump and hose away from the front of the engine with a length of mechanic's wire.
31. NOTE: LH shown, RH similar.
Remove the bolts, the LH and the RH Variable Camshaft Timing (VCT) solenoids.
32. NOTICE: The Oil Pan Holding Fixture must be carefully aligned to the mounting bosses on the oil pan. Failure to follow these
instructions may result in damage to the oil pan.
NOTE: The Oil Pan Holding Fixture and floor jack are used to raise and lower the engine to access the engine front cover and engine mount
bracket fasteners.
Position a floor jack and the Oil Pan Holding Fixture under the oil pan.