Edge AWD V6-3.5L (2009)
![background image](/ford/edge_awd/v6-3.5l/Page-721001.png)
Spark Plug: Service and Repair
Spark Plugs
Spark Plugs
Removal
LH side
1. Disconnect the crankcase vent tube quick connect coupling from the valve cover fitting and position aside.
RH side
2. NOTE: The upper intake manifold must be removed to access the RH spark plugs only.
Remove the upper intake manifold.
Both sides
3. Disconnect the 6 ignition coil-on-plug electrical connectors.
4. NOTE: When removing the ignition coil-on-plugs, a slight twisting motion will break the seal and ease removal.
Remove the 6 bolts and the 6 ignition coil-on-plugs.
5. NOTICE: Only use hand tools when removing or installing the spark plugs or damage can occur to the cylinder head or spark plug.
NOTE: Use compressed air to remove any foreign material in the spark plug well before removing the spark plugs.
Remove the 6 spark plugs.
Installation
Both sides
1. Inspect the 6 spark plugs.