Edge AWD V6-3.5L (2009)
Installation
1. Install the power steering belt on the crankshaft pulley.
2. NOTE: After installation, make sure the power steering pump belt is correctly seated on the crankshaft and power steering pulleys.
Position the power steering belt around the Stretchy Belt Installer Tool and the power steering pulley. Make sure that the belt is engaged with the
power steering pulley and rotate the crankshaft clockwise to install the power steering belt.
3. Position the accessory drive belt on the crankshaft pulley.
4. NOTE: After installation, make sure the accessory drive belt is correctly seated on all pulleys.
Working from the top of the vehicle, rotate the accessory drive belt tensioner clockwise and install the accessory drive belt.
5. Install the RH inner fender splash shield.
