Edge AWD V6-3.5L (2009)
REPAIR the circuit. CLEAR the DTCs. REPEAT the network test with the scan tool.
No
GO to T5.
-------------------------------------------------
T5 CHECK FOR RESTORED NETWORK COMMUNICATION WITH THE HVAC MODULE DISABLED
-
Disconnect: SJB Fuses 15 (10A) and 37 (10A).
-
Enter the following diagnostic mode on the scan tool: Network Test.
-
Repeat the network test.
-
Do all other modules pass the network test?
Yes
INSTALL the removed fuses. Go To Pinpoint Test J. See: Pinpoint Test J: The HVAC Module Does Not Respond To The Scan Tool
No
INSTALL the removed fuses. GO to T6.
-------------------------------------------------
T6 CHECK FOR RESTORED NETWORK COMMUNICATION WITH THE ACM DISABLED
-
Disconnect: SJB Fuses 28 (5A), 39 (20A) and 41 (15A).
-
Enter the following diagnostic mode on the scan tool: Network Test.
-
Repeat the network test.
-
Do all other modules pass the network test?
Yes
INSTALL the removed fuses. Go To Pinpoint Test K. See: Pinpoint Test K: The Audio Control Module (ACM) Does Not Respond To The Scan Tool
No
INSTALL the removed fuses. GO to T7.
-------------------------------------------------
T7 CHECK FOR RESTORED NETWORK COMMUNICATION WITH THE SJB DISABLED
-
Disconnect: SJB Fuse 5 (10A).
-
Enter the following diagnostic mode on the scan tool: Network Test.
-
Repeat the network test.
-
Do all other modules pass the network test?
Yes
INSTALL the removed fuse. Go To Pinpoint Test I. See: Pinpoint Test I: The Smart Junction Box (SJB) Does Not Respond To The Scan Tool
No
INSTALL the removed fuse. GO to T8.
-------------------------------------------------
T8 VERIFY VEHICLE EQUIPMENT - DSM
-
Inspect the vehicle for a DSM.
-
Is the vehicle equipped with a DSM?
Yes
GO to T9.
No