ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3078 > < Initial Inspection and Diagnostic Overview|Page 3076
Page 65
background image

GO to U38.

No

GO to U39.

-------------------------------------------------
U38 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TO GROUND WITH THE DSM DISCONNECTED

-

Disconnect: DSM C3299d.

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Are the resistances greater than 1,000 ohms?

Yes

CONNECT the negative battery cable. GO to U51.

No

GO to U39.

-------------------------------------------------
U39 VERIFY VEHICLE EQUIPMENT - DCSM

-

Inspect the vehicle for a Dual Climate Controlled Seat Module (DCSM).

-

Is the vehicle equipped with a DCSM?

Yes

GO to U40.

No

GO to U41.

-------------------------------------------------
U40 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TO GROUND WITH THE DCSM DISCONNECTED

-

Disconnect: DCSM C3036c.

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Are the resistances greater than 1,000 ohms?

Yes

CONNECT the negative battery cable. GO to U52.

No

GO to U41.

Initial Inspection and Diagnostic Overview|Page 3078 > < Initial Inspection and Diagnostic Overview|Page 3076