Edge AWD V6-3.5L (2009)
information, refer to Roof Opening Panel Motor - Sliding Front Panel See: Body and Frame/Roof and Associated Components/Sunroof /
Moonroof/Sunroof / Moonroof Motor/Service and Repair/Roof Opening Panel Motor - Sliding Front Panel.
15. Connect the roof opening panel electrical harness connector.
16. Install the antenna.
17. Install the headliner.
18. With the roof opening sliding glass panel still removed, initialize the roof opening panel motor(s). For additional information, refer to Roof
Opening Panel Motor Initialization See: Body and Frame/Roof and Associated Components/Sunroof / Moonroof/Testing and
Inspection/Programming and Relearning.
19. NOTE: Press the roof opening panel control switch to move the mechanisms rearward to allow installation of the sliding glass panel.
NOTE: It will be necessary to carry out the initialization procedure again after the glass panel is installed.
Install the roof opening panel sliding glass. For additional information, refer to Roof Opening Panel Glass - Front Sliding See: Body and
Frame/Roof and Associated Components/Sunroof / Moonroof/Sunroof / Moonroof Panel/Service and Repair/Roof Opening Panel Glass - Front
Sliding.
20. Install the ditch mouldings and clip strips.
