Edge AWD V6-3.5L (2009)
Wheel Fastener: Service and Repair
Rear Suspension
Wheel Studs
Removal
1. Remove the wheel bearing and wheel hub. For additional information, refer to Wheel Bearing and Wheel Hub See: Wheel Bearing/Service and
Repair/Rear Suspension.
2. Using a suitable press, remove the wheel stud from the wheel hub.
-
Discard the wheel stud.
Installation
1. Position the new wheel stud in the wheel hub, aligning the serrations in the wheel hub flange made by the original wheel stud.
2. Using a suitable press, install the wheel stud.
3. Install the wheel bearing and wheel hub. For additional information, refer to Wheel Bearing and Wheel Hub See: Wheel Bearing/Service and
Repair/Rear Suspension.