Edge AWD V6-3.5L (2009)
3. Tighten the main control cover bolts in the sequence shown.
-
Tighten to 12 Nm (106 lb-in).
4. Position the transmission fluid cooler thermal bypass valve and transmission fluid cooler tube assembly in place and install the 2 transmission fluid
cooler thermal bypass valve bracket nuts.
-
Tighten to 9 Nm (80 lb-in).
5. Connect the transaxle electrical connector.
6. Inspect the transmission fluid cooler tube backing ring and seal for damage and install a new backing ring or seal if necessary. Lubricate the
transmission fluid cooler tube seal with clean transmission fluid and install the backing ring and seal on the transmission fluid cooler tube.