Edge AWD V6-3.5L (2009)
12. Position the ACL assembly in place and install the bolt.
-
Tighten to 11 Nm (97 lb-in).
13. Tighten the ACL outlet pipe clamp at the TB.
-
Tighten to 5 Nm (44 lb-in).
14. Connect the engine breather to the ACL assembly.
15. Connect the brake booster vacuum hose to the ACL assembly.
16. Connect the MAF sensor electrical connector and connect the electrical harness fastener.
17. Fill with clean transmission fluid to the correct level.
