Edge AWD V6-3.5L (2009)
![background image](/ford/edge_awd/v6-3.5l/Page-1305002.png)
4. Using a suitable awl, poke a small hole in the halfshaft seal.
5. Using a suitable dent puller, remove the halfshaft seal.
Installation
1. Install a new halfshaft seal on the Cover Axle Seal Installer and Handle.
2. Using the Cover Axle Seal Installer and Handle, install the LH halfshaft seal.
3. Install the front LH halfshaft.
4. Fill with clean transmission fluid to the correct level.