Edge AWD V6-3.5L (2009)
21. Disconnect the Turbine Shaft Speed (TSS) and Output Shaft Speed (OSS) sensor electrical connectors.
22. NOTICE: The solenoid body should be handled with care, damage to the solenoid body may occur.
NOTE: Note the location of the different length bolts for assembly.
Remove the bolts and the solenoid body.
23. NOTICE: Do not handle the solenoid body in the leadframe area or by the screens of the solenoid body filter or damage to the solenoid
body can occur.
NOTICE: Use care not to break the alignment tabs when removing the solenoid body filter.
Remove the solenoid body filter assembly by pulling it straight up from the alignment tabs. Discard the filter.
24. Remove the bolts, the TR sensor detent spring and the main control valve body.