Edge AWD V6-3.5L (2009)
17. Disconnect the transaxle electrical connector.
18. Remove the 2 nuts, pull the transmission fluid cooler thermal bypass valve straight up and position it aside.
19. NOTE: Note the location of the stud bolts for assembly.
Remove the 14 bolts and the main control cover.
20. Disconnect the Transmission Range (TR) sensor electrical connector.
1. Slide the lock over.
2. Press the tab and disconnect the connector.
21. Disconnect the Turbine Shaft Speed (TSS) and Output Shaft Speed (OSS) sensor electrical connectors.