Edge AWD V6-3.7L (2011)
2. Insert a rubber plug into the exposed hole. To aid in the installation of the rubber plug, place a small Phillips or Torx screw driver in the center hole
opening of the rubber plug.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
110307A
2008-2011 Edge, MKX:
0.2 Hr.
Remove The Rubber
Bumper And Install Service
Plug On One Or Both
Doors (Do Not Use With
Any Other Labor
Operations)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
5424630
41
Disclaimer
