Edge AWD V6-37L (2011) Rear Subframe Service and Repair Instructions
12. Remove the rear shock-to-trailing link lower nuts and flag bolts.
-
Discard the nuts and flag bolts.
-
To install, tighten to 80 Nm (59 lb-ft).
13. NOTICE:
-
The rear subframe must be secured to the lifting table. The rear subframe may become unstable and fall from the lifting table.
-
Position a jackstand under the front of the vehicle to keep the vehicle from becoming unstable on the hoist.
Position the lifting table under the rear subframe.
14. Remove the 4 front (2 each side) bushing brace-to-body bolts.
-
Discard the bolts.
-
To install, tighten to 25 Nm (18 lb-ft).
15. Remove the 2 front (1 each side) mounting bolts from the rear subframe.
