Edge FWD V6-3.5L (2007)
15. Remove the screw.
-
To install, tighten to 8 Nm (71 lb-in).
16. If equipped, remove the keypad.
17. Remove the 10 door module bolts and remove the front door module, transfer parts as necessary.
-
To install, tighten to 9 Nm (80 lb-in).
18. To install, reverse the removal procedure.
-
MKX Only, if installing a new front window motor, it must be initialized. If installing the original front window motor it must be de-initialized,
then initialized.