Edge FWD V6-3.5L (2007)
1. Remove the LH quarter trim panel access cover.
2. Unclip the power liftgate rod from the motor assembly.
-
Squeeze the clip as shown to release and position the rod assembly upward.
3. Remove the cover and the power liftgate rod-to-liftgate retaining nut.
-
To install, apply Threadlock 262 to the threads of the fastener and tighten to 11 Nm (8 lb-ft).
4. Remove the 3 power liftgate rod mounting bracket nuts.
-
To install, tighten to 11 Nm (8 lb-ft).
5. To install, reverse the removal procedure.
