Edge FWD V6-3.5L (2007)
8. Remove the 2 bolts (1 each side) from the brake hose bracket.
9. Position the brake calipers aside using mechanic's wire. It is not necessary to disconnect the hydraulic brake lines.
10. Remove the 2 nuts (1 each side) from the parking brake cable bracket and upper stabilizer shaft.
-
Discard the nuts.
-
To install, tighten to 35 Nm (26 lb-ft).
11. Remove the 4 bolts (2 each side) from the parking brake cable-to-backing plate.
