Edge FWD V6-3.5L (2007)
MKX only
6. Remove the storage bin.
-
Remove the 2 scrivets.
-
Disconnect the power point electrical connector.
7. Remove the 2 console front side bolts.
-
To install, tighten to 6 Nm (53 lb-in).
All vehicles
8. Remove the 2 console-to-instrument panel bolts.
-
To install, tighten to 6 Nm (53 lb-in).
9. Disconnect the floor console electrical connector from the lower right front wiring harness.
10. Remove the floor console.
11. To install, reverse the removal procedure.
