Edge FWD V6-3.5L (2007)
Keyless Entry Transmitter: Service and Repair
Remote Memory Activation
REMOTE MEMORY ACTIVATION
1. Position the driver seat and mirrors to the desired position.
2. Press the set button on the driver door panel.
3. Within 5 seconds press the 1 or 2 button on the driver door panel to associate with the driver 1 or driver 2 position.
4. Press the set button again.
5. Within 5 seconds press a button on the associated integrated keyhead transmitter (IKT).
6. Within 5 seconds press the 1 or 2 button on the driver door panel to associate with the driver 1 or driver 2 position.
7. If a second memory setting is desired, repeat the procedure with the second IKT.