Edge FWD V6-3.5L (2007)
1. Remove the rear roof rack bolt cover.
-
Lift upward on the rear of the bolt cover and then pull rearward.
2. Remove the front roof rack bolt cover.
-
Lift upward on the front of the bolt cover and then pull forward.
3. Remove the 2 front roof rack bolts.
-
To install, tighten to 6 Nm (53 lb-in).
4. Remove the 2 rear roof rack bolts.
-
To install, tighten to 6 Nm (53 lb-in).