Edge FWD V6-35L (2007) Sunroof Sun Shade Service and Repair
3. NOTE: The shade is under spring tension.
Depress the tabs and slide the guide bar (leading edge of shade) forward to release it from the mechanism guide shoes and allow the shade to
retract completely.
4. Remove the 2 front sunshade carrier outer screws.
-
To install, tighten to 5 Nm (44 lb-in).
5. Remove the 2 front sunshade carrier center screws and the front sunshade assembly.
-
To install, tighten to 6 Nm (53 lb-in).
Rear shade assembly
6. Open the rear shade to the half open position.
7. NOTE:
-
Front guide shown, rear similar.
-
The shade is under spring tension.
Depress the tabs and slide the guide bar (leading edge of shade) forward to release it from the mechanism guide shoes and allow the shade to
retract completely.