Edge FWD V6-3.5L (2007)
3. Remove the 4 rear spoiler nuts.
-
Remove the 2 nut covers.
-
Remove the 4 nuts.
4. Place a piece of tape on the liftgate to protect the paint.
5. NOTE: There are 4 pin type retainers on the bottom of the spoiler. When removing the spoiler it is difficult to access the retainers to release them
from the liftgate. It may be necessary to pry upward on the rear spoiler to release it from the retainers. Do not pry on the window.
Remove the rear spoiler.
-
Place a pry bar between the liftgate and the spoiler.
6. To install, reverse the removal procedure.
-
Replace any retainers broken during removal.